Our conveyor belt vulcanizing machines and splicing tools are mainly applied to industries for splicing and repairing for conveyor belting such as metallurgy, mine, power plant, port, dock, construction material cement, chemical industry ,tobacco ,and food automatic line field.
Technical Parameters of 韩剧网97无弹窗 韩剧网97最新章节目录,色即是空2迅雷下载无弹窗 色即是空2迅雷下载最新章节,我的老师方碧如最新章节列表 我的老师方碧如最新章节conveyor belt vulcanizer
1.Machine Maximum size: from 300MM-6000MM;
2.Voltage: 220V 380V 415V 660V 50HZ(Other voltages are also available);
3.Fast Cooling time: 20 minutes (from 145 degrees down to 70 degrees or less);
4.Time for temperature raise (from normal temperature to vulcanizing temperature) no more than 25 minutes;
5.The temperature difference of sulfide surface: ±3°c;
6.Temperature adjustment range: 0~200°c;
7.Vulcanizing pressure: 0~2.5 MPa (details refer to users’ specifications and factory markings);
8.Time of heat preservation for vulcanizing could be adjusted according to thickness of the rubber belts;
9. Splicing length of rubber conveyor belt for vulcanizing jointing could be connected together by single or several pieces if necessary;
10.Degree of heating plate: Usually we suggest 20°(rectangle other bias angle is also available);
11.Suitable for belt type: Common rubber conveyor belt and steel cord conveyor belt.
|Specification Sheet of SD Vulcanizing Machine|
|Model||Width of Conveyor Belt(mm)||Rectangle Spec (mm)||Hot Plate Size (mm)||Power(KW)||Machine Size(mm)||Machine Weight(kg)|
|SD-1800||1800||1800*830||830*2079韩剧网97无弹窗 韩剧网97最新章节目录,色即是空2迅雷下载无弹窗 色即是空2迅雷下载最新章节,我的老师方碧如最新章节列表 我的老师方碧如最新章节||25||2592*830*900||1420|
When order,please supply below information, our engineer will make a solution for you
- Max belt width
- Heating platen length (or pleasesupply belt manufacturer’s recommended splice length)
- What kind of belt, light duty belts or heavy duty belts
- Working Voltage
- Pressure requirements
- Degree of heating platen (standard will be 22 degree)
1. The vulcanizer press upper and below heating plate
We choose aluminum alloy material with high quality and adopt high strength aluminum alloy to manufacturethe heating plate of the conveyor belt splicing machine.
Its characteristics are as follows:
(1)It has small volume and light weight (as half as before), the consumption is low and heating is very fast. After heating, the whole board face of heating plate is very flexible, more close to the conveyor belt than the conventional conveyor belt vulcanizing press machine.
(2)Various points of hot vulcanizing machine upper and below heating plate can be heated uniform. After
heating for 10 min, the temperature difference of the each point of the board is only + / – 2 ℃ ~ 4 ℃, which surpasses the international standard of the conveyor belt hot splicing equipment.
(3)The temperature can rise from the normal temperature to the vulcanizing temperature (145 ℃) in less than 25 min. The energy saving effect is good.
(4)Vulcanization or repairing can be finished in one time, the splicing joint parts are smooth, bright and clean.
(5)The structure is simple ,and it is easy to install.
2. Water cooling system ( it can be made according to customer requirements!)
There is water cooling system inside the heating plate, it takes only about 20
minutes to cool rapidly from 145 ℃ high temperature to 70 ℃, which speed up the vulcanization process and increase strength of the belt joints
3. Hand shank
The handle has SD soft connection characteristics. It is not hot under the high temperature operation. And it seems small and exquisite.
4.Vulcanization press water pressure plate
(1) The water pressure plate adopts international advanced technology, because of its special structure, the overall can be pressed uniform, The plate experiences numerous high pressure tests.
(2) The water pressure plate can be hydraulic and pneumatic.
5. The Plug of the Power Input Wire cord
Power Input Wire adopts special five core with one flat plug, which changes the disadvantages of conventional multiple line plug and indeed simplify the line.
6.Automatic electrical control box
(1)Automatic electric cabinet and electrical components select intuitive LCD digital display instrument,
which are with good quality and durability. The vulcanization process is fully automatic operated. The alarm lights light, the work will be finished automatically, it is very safe.
(2) Automatic LCD digital display temperature control box looks elegant, small and exquisite. The box is dustproof and waterproof, which can be operated in the dust, heavy rain and other bad weathers.
(3)Equipped with the leakage automatic switch, which has the overload, short circuit, leakage protection performance to ensure personal safety.
(4) Because of circuit integration, automatic operating procedure and unified plug, the electric cabinet can be connected with all rubber belt vulcanizer and repair machines in our factory.
7. Rod, nut
Rod and nut use steel materials with light weight and high strength. It is easy to be operated.